Safety Valves

3.5 8 Reviews SKU: AMPSV00CENDuration: 60 Minutes

Safety valves are commonly used in gas and steam systems to relieve excess pressure before it can cause injuries or equipment damage. Safety valves open quickly to release large volumes of gas or steam.   This course is divided into two sections. Section 1: Types of Safety Valves, covers the concept of pressure and how it is measured and explores methods of relieving excess pressure through use of a rupture disc systems, relief valve systems, and safety valves.   Section 2: Safety Valve Maintenance describes troubleshooting and basic maintenance procedures for a typical safety valve. The section consists of three parts: External Inspection Disassembly and Inspection Reassembly and Testing  

Course Details

Specs

Training Time: 60 minutes

Compatibility: Desktop Only

Based on: Industry Standards and Best Practices

Languages: English

Learning Objectives

  • Section 1: Types of Safety ValvesTopic 1: Pressure and Rupture Disc Systems
  • Define the term pressure.
  • Explain how pressure is measured.
  • Relate the use of rupture disc systems to limit pressure and protect personnel, process, and equipment.
  • Express the economics involved in the decision to use rupture disc system.
  •  Topic 2: Pressure Relief Devices
  • Explain the use of relief valve systems to limit system pressure without performance interruption or shut down.
  • Explain why a relief valve should not be used for steam and gas systems.
  •  Topic 3: Types of Safety Valves
  • Explain the use of safety valve systems to limit system pressure without performance interruption or shut down.
  • Describe the parts and operation of a typical huddling chamber safety valve.
  • Describe the parts and operation of a typical safety-relief valve and a typical pilot-actuated relief valve.
  •  Section 2: Safety Valve MaintenanceTopic 1: External Inspection and Troubleshooting
  • Describe a procedure for performing an external inspection on a safety valve.
  •  Topic 2: Disassembly and Inspection
  • Describe procedures for disassembling a safety valve and inspecting its internal components.
  •  Topic 3: Reassembly
  • Describe procedures for reassembling and testing a safety valve before reinstalling it.
  •  Topic 4: Reinstallation and Testing
  • Describe procedures for reinstalling and testing a safety valve before putting it in service.

Customer Reviews

9/1/2019

Extremely long

“Extremely long”

Lyndon D. Verified Customer

4/16/2019

very useful and helpful.

“very useful and helpful.”

Mario R. Verified Customer

4/12/2019

n/a

“n/a”

Kyle S. Verified Customer

2/25/2019

I do not recommend this course. Has some good information but to much is on rebuilding the valves w

“I do not recommend this course. It has some good information, but too much is on rebuilding the valves which we don't do.”

Dwayne G. Verified Customer

2/1/2019

None at this time

“None at this time”

Kenneth S. Verified Customer

1/8/2019

good training module

“good training module”

Robert H. Verified Customer

11/15/2018

Great information

“Great information, but needs updated.”

Eric F. Verified Customer

10/19/2018

Good

“Actual videos for maintenance and valve operation are great! Good job on the presentations, I learned a lot.”

DIZA L. Verified Customer

Added to Cart! Click here to view your cart.