Hazard Identification Training: How to Do It Right

Hazard Recognition Training Image

Hazard recognition is one of the most critical aspects of occupational safety. In fact, OSHA says that “One of the ‘root causes’ of workplace injuries, illnesses, and incidents is the failure to identify or recognize hazards that are present, or that could have been anticipated.”

The idea that hazard identification/recognition is important to safety is a common one. And following from this, you’ll often see people within the safety industry saying it’s important to train workers on how to identify hazards at work. But what you don’t see quite as often as those first two is any guidance on how to effectively train workers to identify hazards at their workplace. That’s what we’re hoping to help you with a little bit in this article.

By the way, this article was written to parallel the National Safety Council’s National Safety Month (June, 2019) and its first-week emphasis on hazard recognition training. You can learn more about National Safety Month and even download some materials related to hazard recognition from the NSC here.

Hazard Identification Step 1: Knowing What a Hazard Is

It’s probably a good idea to start with a definition of the word “hazard.” This OSHA document explains that “Hazard refers to an inherent property of a substance that is capable of causing an adverse effect. ”

That’s pretty academic, though. So we can rephase that a bit and say that a hazard is something that can cause harm in one way or another–a fatality, an injury, and illness, property damage, damage to the environment, and so on.


Hazard Identification Step 2: Knowing the General Types of Occupational Safety Hazards

Once an employee knows what a hazard is, a logical next step would be to help the employee learn the types of hazards that might exist in a workplace.

Types of hazards workers might confront at work include:

  • Airborne hazards, including hazardous airborne particles and hazardous airborne gases or fumes
  • Chemical hazards, which may affect the worker as a result of inhalation, absorption, or ingestion
  • Biological hazards, including bacteria, viruses, and fungi
  • Ergonomic hazards, including anything related to how the worker interacts with his/her work environment
  • Physical hazards, including noise hazards, radiation hazards, vibration hazards, temperature hazards, struck-by/nip-point/crushing hazards, and cutting hazards
  • Emotional hazards, including stress

Giving examples of each of these types of hazards can help the employee better understand hazards and will prepare the employee to be better at hazard identification.

Read more about this in our What Is Industrial Hygiene? article.

Hazard Identification Step 3: Practicing Hazard Identification

But knowing what a hazard is in general terms, and knowing the types of hazards one might face in a work area, isn’t all there is to hazard identification training. In fact, if your entire hazard identification training program includes nothing but the first two hazard ID training steps above, the employees you’re training most likely will not become effective hazard identifiers.

In training, knowledge is never enough. It’s a necessary pre-condition in many situations, but there’s always more. And that “more” is application. In particular, demonstrations, practice, and feedback from an experienced teacher.

So you’re going to want to give employees a chance to practice hazard identification. How can you do this? You can set up something in a work area. You can use scenario-based learning, perhaps involving virtual reality. There are lots of ways. But the important thing to remember is you want to give employees a chance to practice this new skill of hazard identification. To see which hazards they’re correctly identifying and which they’re not. And to get feedback about how they’re doing.

That’s the basic idea behind OSHA’s Hazard Identification Training Tool (go ahead, check it out, we’ll wait here until you get back).

If you’d like to learn how to help workers truly develop hazard identification/recognition expertise, check our blog article on deliberate practice and use those techniques in your hazard identification training.


Hazard Identification Step 4: Controlling the Hazard

Once a hazard has been identified at your workplace, it’s time to control the hazard so no harm takes place.

The standard way to begin doing this is by using the hierarchy of controls. The basic idea of the hierarchy of controls is that you try to use higher-level controls, such as elimination and substitution, before you try to use lower-level controls, such as PPE.

For more information, check our article on the hierarchy of controls.

You might also wonder how to prioritize your efforts–which hazards to control first. We address this issue in more detail in this article on risk management and occupational safety and health. 

Related Materials to Learn More about Hazard Identification

For more information on hazard identification and hazard identification training, check these additional resources:

Conclusions: Employees Can Learn To More Effectively Identify Hazards in the Work Area

Hazard identification is definitely an essential skill for all workers (and safety professionals) to have. But it’s important to remember that we’re not born with this skill. It’s rarely something an employee has when he or she is hired. And a person doesn’t become skillful in hazard recognition simply by knowing what hazards are. You’ve got to train to  become proficient at this.

We hope this article has raised awareness of the need to train to develop hazard ID skills, and we hope we’ve given you some tips of how to structure your hazard identification training program. If you have any other questions, please let us know.

Before you go, please help yourself to a free copy of our Effective Safety Training Guide, below.

OEE-guide-btn

Effective EHS Training: A Step-by-Step Guide

Learn how to design, create, deliver, and evaluate effective EHS training by following these best practices with our free step-by-step guide.

Download Free Guide

guide-btn
Jeffrey Dalto

Jeffrey Dalto

Jeffrey Dalto is an Instructional Designer and the Senior Learning & Development Specialist at Convergence Training. He's worked in training/learning & development for 25 years, in safety and safety training for more than 10, is an OSHA Authorized Outreach Trainer for General Industry OSHA 10 and 30, has completed a General Industry Safety and Health Specialist Certificate from the University of Washington/Pacific Northwest OSHA Education Center and an Instructional Design certification from the Association of Talent Development (ATD), and is a member of the committee creating the upcoming ANSI/ASSP Z490.2 national standard on online environmental, health, and safety training. Jeff frequently writes for magazines related to safety, safety training, and training and frequently speaks at conferences on the same issues, including the Washington Governor's Safety and Health Conference, the Oregon Governor's Occupational Safety and Health Conference, the Wisconsin Safety Conference, the MSHA Training Resources Applied to Mining (TRAM) Conference, and others.

Leave a Reply

Your email address will not be published. Required fields are marked *