Effective Safety Training Delivery: ANSI Z490.1, Section 5

EFFECTIVE-EHS-TRAINING(Note: This article is based on the newly revised, 2016 version of ANSI Z490.1.)

Hello. We’re back and we’re continuing our look at ANSI Z490.1, the standard that lists “Criteria for Accepted Practices in Safety, Health, and Environmental Training.”

In this post, we’re going to take an in-depth look at Section 5, which is all about delivering EHS training.

The strong focus is on the EHS trainer in this one, plus there’s some stuff about training delivery and training materials.

If you want to download our free 42-page Guide to Effective EHS Training, based on ANSI Z490.1, just click that link you just whizzed past or scroll down to the bottom of this article and click the download button.

Otherwise, let’s learn more about effective EHS training delivery, including trainers, training delivery, and training materials, right?

Convergence Training is a training solutions provider with a strong EHS offering. We offer off-the-shelf EHS e-learning courses, custom training solutions, learning management systems (LMSs), and more. Contact us for previews, demos, or questions.

Effective EHS Training Delivery

As we mentioned earlier, this section addresses EHS training delivery and focuses on the following:

  • EHS trainers
  • EHS training delivery
  • EHs training materials

Let’s look at each of those in closer detail below.

Effective EHS Trainers

Effective EHS trainers share a set of characteristics. They:

  • Are qualified
  • Have subject matter expertise
  • Have training delivery skills
  • Pursue continuing education
  • Can document their qualifications

EHS Trainer Qualifications

When you’re designing and developing EHS training (see our article on Section 4), you should specify all necessary qualifications for any EHS trainer who will lead that training.

Those qualifications may include subject matter expertise, training experience, and training delivery skill.

Subject matter expertise: This means knowledge of the EHS subject they’ll be teaching. The trainer may need technical knowledge, skills, or abilities to lead training on the topic effectively. The trainer doesn’t have to be Einstein, but does need to know his or her stuff. The word “appropriate” seems key here.

Training delivery skills: This means knowledge of effective manners of delivering training, with a particular emphasis on knowing and appealing to adult learning principles.

Trainers should keep their subject matter expertise and training delivery skills sharp and current through continuing education and other professional development opportunities. Training program administrators should create documents that show how EHS trainers comply to these expectations. This can include resumes, continuing education certificates, licenses, registrations, and/or simple experience sheets. There’s no one defined way to do this properly–just do it.

Proper Training Preparation, Learning Environment Management, Delivery Methods, and Use of Materials

Delivery of effective EHS training and EHS training materials includes:

  • Planning and preparation before training delivery
  • Proper management of the learning environment (where the training will occur)
  • Effective use of training delivery methods and training materials, including:
    • Use of adult learning principles
    • Delivery of appropriate feedback and communication

Let’s look at each of these in more detail.

EHS Training Planning and Preparation

This stage includes getting the trainer ready. Most notably, this means making sure the trainer:

  • Meets the qualifications for an effective, appropriate trainer listed above
  • Knows the course’s learning objectives (read more about learning objectives here and here)
  • Knows the course’s training materials
  • Knows and knows how to use the primary training delivery method and the backup/alternate delivery method
  • (For instructors in virtual training environments) Virtual-training instructor will have practiced training in the virtual environment enough to be completely familiar with the delivery system and familiar with backup plans in case of a malfunction/technical error

 Managing the Learning Environment for EHS Training

Learning happens best in an appropriate learning environment that meets the needs of the trainees. In particular, the training environment should:

  • Be safe, with no safety hazards
  • Not be in an environment that’s so noisy it interferes with employee’s ability to hear
  • Have an appropriate climate, including temperature and air quality
  • Have appropriate lighting so that all training materials and activities are easily visible
  • Have appropriate seating and/or work areas
  • Be set up with proper ergonomics for the employees
  • Provide access to water and restrooms
  • Have enough emergency exits and a planned evacuation route
  • Have a manner of calling for emergency medical assistance if necessary
  • Allow enough space for an appropriate trainer-to-trainee ratio

In addition, the learning environment should be one that helps facilitate learning. The Association for Talent Development has some good books on this kind of stuff.

And, if any training materials or aids will be used in the training session, there must be an adequate supply for all trainees, and they must be in good, operating condition.

Lastly, although this isn’t mentioned in ANSI Z490.1, a lot of research shows that workers are more likely to remember information from training and apply that training on the job if the training occurs in the same environment that the workers will later be expected to apply the training (the work area). This isn’t possible every time for a number of reasons, but try to take advantage of this when possible. Or, try to have them train with equipment and materials that will present the same visual clues they’ll see in the work area (“that handle” on the machine, “that row” on the spreadsheet,” etc.).

Effective Use of Training Delivery Methods and Training Materials

Now let’s look at the requirements regarding training delivery methods and materials.

Familiarity with Training Delivery Methods and Materials as Designed

The first thing the trainer should do is to be familiar with the training delivery methods and training materials that were designed and created during the training development phase of this process and to apply them so that the learning objectives are supported. For more about training development and learning objectives, please see our previous post in this series: Section 4 (Designing Effective EHS Training).

Adult Learning Principles

In addition, the trainer should make appropriate use of adult learning principles. In explaining this more fully, Section 4 states that “at a minimum,” the trainer should:

  • Treat employees in training with respect
  • Recognize and respond to their individual learning styles/preferences
  • Manage difficult situations by exercising appropriate professional judgment
  • Be flexible in tone and pace to accommodate the learning needs of the employees at the training
  • Do what’s necessary to coach, counsel, and guide the employees to make the learning experience as effective as possible
  • Respect, value, and appreciate the different levels of experiences that the employees bring to the training
  • Encourage active participation from all employees in the training

Communication and Feedback

Finally, the trainer also has to ensure appropriate communication and feedback during the training. One of the fundamental concepts of training is that you’ve got to give the learners (or trainees, or employees, or whatever you want to call them) the chance to ask questions, get feedback on their questions or performances, and generally feel free to communicate openly and effectively about the training topic. Trainers should foster an environment that encourages and supports questions and comments, and they should build-in opportunities for practice and feedback. Remember to always create an atmosphere in which the learners feel safe asking questions; never make fun of or shame people when they ask something.

The Rest of ANSI Z490.1 and Our Free Guide to Effective EHS Training

That’s it for this quick overview of Section 5. Here are links that lead to the rest of the articles in this series:

To download a free guide based on all of Z490.1, just click the button below.

Need an LMSEHS training courses, or other help with your safety training program? Contact Convergence Training to learn more.

 

effective-EHS-training-guide

Jeffrey Dalto

Jeffrey Dalto

Jeffrey Dalto is an Instructional Designer and the Senior Learning & Development Specialist at Convergence Training. Jeff has worked in education/training for more than twenty years and in safety training for more than ten. You can follow Jeff at LinkedIn as well.

Leave a Reply

Your email address will not be published. Required fields are marked *