7 Basic Tools of Quality

7 Basic Tools of Quality Image

Quality control experts lean heavily on the so-called “7 Basic Tools of Quality” to fine-tune processes as part of an overall quality assurance effort.

These basic QA tools are often associated with Karou Ishikawa, a Japanese thinker who’s credited as a heavyweight in quality management and who is especially known for the development of the quality circle and Ishikawa, or fishbone, diagram, which is itself one of the 7 basic tools we’ll talk about in this article.

And as is often the case in quality issues, you can also detect the influence of W. Edwards Deming on the 7 basic tools.

The 7 tools are graphing techniques that people commonly use for quality control troubleshooting purposes.

So let’s start learning about these very useful techniques for quality control.

Quick note: You can download a free 7 Basic Tools of Quality Guide at the bottom of this article.

7 Basic Tools of Quality

You can use the 7 basic tools of quality to help understand and solve problems or defects in any industry.

They’re easy to use and don’t require a masters degree in statistics, which is nice. And that’s even more true these days since there are software programs that can create the graphs and diagrams after you feed them the data.

If you know how to use the 7 basic tools, they’ll give you a big help with solving the problems you face at work on a daily basis.


Quality Tool 1: The Cause-and-Effect Diagram (also known as Ishikawa Diagram and/or Fishbone Diagram)

An Ishikawa diagram is also known as a fishbone diagram; that’s because it looks like a child’s drawing of a fish skeleton. It’s also known as a cause-and-effect diagram because it’s often used to show the cause of some effect.

Here’s an example fishbone diagram in the image below.

Cause and Effect/Fishbone Diagram Image

In addition to using fishbone diagrams to identify the cause of an event, people also use them find the cause of a problem or for other reasons.

You should always draw the “fish skeleton” of an Ishikawa diagram so that the “head” of the fish points to the right. The head represents the problem or cause. The “bones” of the fish branch off the central, horizontal spine and angle backward to the left. Each bone represents one possible major cause of the event. You can add smaller bones branching off each major bone to represent sub-causes related to that major cause.

In analyzing production processes, the 6M fishbone design is often used. In 6M, the potential major causes are:

  • Machines
  • Manpower (people)
  • Materials
  • Measurements
  • Methods
  • Mother nature (environment)

The 6M method is illustrated below.

6Ms for Cause and Effect Diagram Image

You can’t use the 6M cause-and-effect diagram for every situation, but it can be a helpful way to begin organizing thoughts for many. For other problems, you may need to come up with your own causes.

Because it seems that nothing’s ever simple and easy, you will sometimes seen this listed as the 5 Ms (machine, method, material, man, measurement) and even see it sometimes expanded to 8 Ms (including mission, mother nature, management, and maintenance). Use what works best for each scenario.

Quality Tool 2: The Check Sheet

A check sheet is a sheet or form you can use to collect and then later analyze data. It’s typically created at the location where the data is created, such as at the end of a production line.

People often use check sheets to collect data on the frequency, location, or even cause of problems or defects that occur during production.

The check sheet is divided into a number of different regions, and data is then marked into the different regions using different types of marks to indicate different types of problems. The total number of each type of problem is also recorded.

Below is an example check sheet for quality purposes.

Check Sheet for Quality Image

In general, a check sheet will include headings that provide the following information:

  • Who recorded the data
  • Where the data was collected
  • When the data was collected
  • What each check or mark on the check sheet means (for example, the type of defect or problem)
  • Why the data was collected

Using Check Sheets to Keep Track of the Completion of Steps in a Multi-Step Procedure

You can use check sheets to describe and then analyze the results of a procedure, as explained above.

But in addition, you can also use check sheets to track of the completion of the different steps of a procedure. In this case, the check sheet is often known as a checklist.

The checklist concept is all about creating a list of procedures for a worker to follow so he/she won’t make a mistake. This type of check sheet is especially useful during multi-step procedures, and in quality it’s often used when checking and finishing process outputs.

For more about checklists, you may also want to check out:

You may also be interested to learn more about mobile digital tools for checklists, such as the one shown below.

checklist image

Quality Tool 3: The Control Chart

You can use a process control chart to track the values of a process over time. They’re also known as Shewhart charts (after Walter A. Shewhart) or process-behavior charts.

The vertical dimension of the chart usually represents a process value or measurement, and the horizontal dimension usually represents time–when the measurement was taken or how often it was taken. Control charts are great for analyzing and reducing variation in a process, and you can use them to determine if a process is “in control” or not.

Although there are different types of control charts for different types of data, all control charts have a center line that represents the average or mean and two parallel lines (above and below that center line) that represent the upper and lower control limits.

You can see an example control chart below. Note the two axes chart a given variable and time, the solid horizontal line represents the average or mean, and the dotted lines represent the control limits.

Control Chart for Quality Image

Some of the concepts behind the control chart are briefly explained in this short sample from our online process control charts training course, below.

There are several conditions that indicate the process is out of control, including having at least one point outside the control limits or having nine points in a row on the same side of the centerline.

Here are some examples of how process control charts might be used at production facilities:

  • A paper manufacturer might track the thickness of their paper.
  • A pizza company might track how many pepperoni are on their pizzas.
  • A power company might track the amount of energy being produced.

You can use a process control chart to measure a wide range of process behaviors, such as: 

  • Product values – For example, the number of pepperoni on each slice of pizza
  • Defect rates – For example, the number of defects per hour or the number of defects per 100 samples
  • Deviation – For example, the difference between the previous measured value and the current measured value
  • Non-physical processes – For example, the amount of time it took for a product to go from concept to production

Quality Tool 4: The Histogram

A histogram is a graph that shows how often a value, or range of values, occurs within a given time period. Histograms provide a visual summary of large amounts of variable data. Histograms were first introduced by Karl Pearson.

An example histogram is shown below.

Histogram for Quality Assurance Image

The shape of the distribution can tell you a lot about the data set. Using a histogram, you can tell:

  • How data is distributed, including if it’s distributed normally
  • If the process will meet customer requirements
  • If changes have occurred in the process

You can also use histograms to compare two different processes.

To create a histogram, start by determining the intervals or “bins” that represent the range of values, then determine how many values fall into each bin. The bins are typically consecutive, non-overlapping, and of the same size (though that last one isn’t required).

Once all the values are plotted into the bins of a histogram, the patterns of the histogram are described as:

  • Symmetric
  • Skewed left
  • Skewed right
  • Unimodal
  • Bimodal
  • Multimodal

Quality Tool 5: The Pareto Chart

Pareto charts are based on the Pareto principle, or 80/20 rule, which states that roughly 80% of the effects are caused by 20% of the problems. Pareto charts are named after Vilfredo Pareto, as is–you guessed it–the Pareto Principle.

Pareto Principle for Quality Image

In a Pareto chart, the vertical axis on the left often represents the frequency of occurrence. The right vertical axis represents the cumulative percentage of the total number of occurrences. The chart itself includes bars and a line graph.

Each bar in a Pareto chart represents the relative frequency or magnitude of a problem or cause. The bars are arranged in descending order, with the longest or tallest on the left, and the shortest on the right.  And the line graph shows the percentage of total data included up to that problem category.

Pareto Chart Image

Arranging the bars in this way allows you to visually identify the most significant data groups, which helps you zero in on and prioritize the most significant problems. In quality control, the Pareto chart is often used to represent sources of defects, types of customer complaints, and similar issues.

Quality Tool 6: The Scatter Diagram

Scatter diagrams are also called scatter graphs, scatter charts, scatter plots, and even scattergrams. Scatter diagrams are often used to help understand how variables are related and also to identify root cause.

A scatter plot is a graph of paired numerical data samples. You plot the independent variable on the horizontal x-axis and the dependent variable on the vertical y-axis. You can then draw a trend line to study the relationship between the variables.

Scatter Plot Image

The closer the data points align with the trend line or curve, the stronger the relationship and the more likely it is that a change in one variable will change the value of another variable. Scatter plots are often paired with a regression analysis, which rates or scores the strength of the relationship between the two variables and can help predict future values.

Scatter Plot Regression Analysis Image

Scatter diagrams can be built as:

  • Bubble charts
  • Line charts
  • Marker charts

Quality Tool 7. Stratification (also known as Flow Chart and/or Run Chart)

Stratification is a way to organize data, and in particular of separating data into meaningful groups. Stratification is also known as a flow chart or run chart.

In stratification, you should include each data point in only one group, and you should leave no data point(s) out.

Below is an example of stratification.

Stratification Image

Once  you’ve separated the data into groups, you can then compare the groups and see the effects of the grouping variables.

Typical stratification groups used for quality control purposes include:

  • Who – the people involved with the problem. For example, which operator or crew was working at the time
  • What – machines, products, raw materials or any other objects relevant to the problem
  • Where – a process area, physical location, or a location on a machine or product
  • When – time of day, day of the week, shift, or process step when the problem occurs
Stratification Groups Image

Some more examples of stratification are shown below.

Stratification Examples

As you can imagine, there are many more possible ways to use stratification in quality analysis (and in other uses, too).


Conclusion: 7 Basic Tools of Quality

We hope you found some useful information about quality control and learned some helpful quality control tools in this article about the 7 basic tools of quality. Remember that we have an online 7 Basic Tools of Quality training course if you’d like to check that out.

Keep your eye on our blog for future articles looking at each tool in more depth, plus additional articles about quality control and quality assurance tools and techniques.

Also know that we’ve got an upcoming online 7 basic quality tools course that’s currently in production and will be ready for you to buy soon. It’s just another new title in our online manufacturing training courses library.

Let us know if you’ve got any additional questions. Otherwise, we’ll catch up with you again at our next article.

And before you leave, download the FREE GUIDE TO THE 7 BASIC TOOLS OF QUALITY below.

Button

Free 7 Tools of Quality Guide Download

Get this free guide to the 7 Basic Tools of Quality, widely used in quality assurance (QA) and other continuous improvement processes.

Download Free Guide

Button
Jeffrey Dalto

Jeffrey Dalto

Jeffrey Dalto is an Instructional Designer and the Senior Learning & Development Specialist at Convergence Training. He's worked in training/learning & development for 25 years, in safety and safety training for more than 10, is an OSHA Authorized Outreach Trainer for General Industry OSHA 10 and 30, has completed a General Industry Safety and Health Specialist Certificate from the University of Washington/Pacific Northwest OSHA Education Center and an Instructional Design certification from the Association of Talent Development (ATD), and is a member of the committee creating the upcoming ANSI/ASSP Z490.2 national standard on online environmental, health, and safety training. Jeff frequently writes for magazines related to safety, safety training, and training and frequently speaks at conferences on the same issues, including the Washington Governor's Safety and Health Conference, the Oregon Governor's Occupational Safety and Health Conference, the Wisconsin Safety Conference, the MSHA Training Resources Applied to Mining (TRAM) Conference, and others.

7 thoughts on “7 Basic Tools of Quality

  1. This was very interesting, and timely for me as I am studying towards my CQI … via ASQ Canada. Can you recommend other articles (the basics) that might be as useful and helpful as this one. Thank you. Dan T

Leave a Reply to Njume Terence Cancel reply

Your email address will not be published. Required fields are marked *